Tire Bead Remover and Cutter Machine

The tire bead remover and cutter machine is designed to remove bead wires from waste tires and cut the tire body into smaller blocks. It is the most advanced truck tire side cutter on the market today.

  • Capacity: 3000 kg/h
  • Application: 900-1200 mm tires
  • Service: Warranty, installation, technical support, etc.
  • Integration of 2 major functions for greater efficiency!
  • Low energy saving, more eco-friendly!
  • Easy to operate and maintain.
Contact Us
tire wire extractor and cutter machine

Key Features of the Tire Block Cutter

  • Simultaneously, the ring cutting and cutting function saves the manual transportation link and improves production efficiency.;
  • Separate the steel wire in advance, effectively protect the downstream crushing equipment, and improve the overall service life of the recycling line.
  • Suitable for many types of tires, the tool is wear-resistant, easy to replace, and routine maintenance is simple.
  • Equipped with operating buttons, safety guards and emergency stop switches to protect the personal safety of the operator, covering a small area.
tire wire extractor and cutter machine
Play

Spacifications About the Tire Wire Extractor and Cutter Machine

NameTire bead remover and cutting machine
Capacity3000kg/h
Power7.5+3 KW
ApplicationHandle 900-1200 mm tires
Machine weight1500 kg
Machine size2.45*1*1.7 m
Packaging Size2.6*1.2*1.9 m
Blades MaterialCr12MoV

How Does the Tire Bead Remover and Cutter Machine Work?

The tire debeader and cutting machine is mainly composed of the main frame, hydraulic system, cutter, control system, etc.

The operator will place the tire at the cutting station then place the tire in the cut-off position.

After the equipment is started, the hydraulic system drives the cutter to remove and separate the embedded steel wire ring on the side wall of the tire.

After cutting the ring, the tire is transferred to the cutting position.

Under the hydraulic pressure, the tire is cut into several pieces of rubber material by the cutter, which is convenient to enter the next crushing process.