Tire Ring Cutter Machine

It is the first step in a semi-automatic tire recycling line that efficiently cuts and removes tire sidewall for further recycling.

  • Capacity: 40 pcs/h
  • Work Range: 650-1250mm
  • Application: Car tires, bus tires, truck tires, etc.
  • Service: Warranty, installation, technical support, etc.
  • Wide Application
  • Efficient and Accurate Cutting
  • Easy Operation Steps
Contact Us
tire ring cutter
tire ring cutter

Why We Need Tire Ring Cutter Machines?

The bead part of scrap tires contains a large number of high-strength steel wires with hard structure, which is difficult to be crushed directly, and not only reduces the subsequent processing efficiency, but also easily causes damage to the crusher and other equipment.

After the tire ring cutter effectively separates the tire bead, the soft rubber part in the middle can be retained for subsequent crushing and grinding, which greatly improves the recycling efficiency. At the same time, the separated bead steel wire can be further extracted and recycled by the tire steel wire separator, realizing the efficient utilization of steel wire and rubber resources.

Efficient Tire Ring Cutter in Action!
Play

Key Features About Shuliy Tire Ring Cutting Machine

  • Suitable for a wide range of tire types, including cars, trucks, buses, etc.
  • Equipped with powerful motors, sharp knives, cutting beads with high efficiency
  • Easy to operate, non-professionals can be trained to use
  • Made of high-quality stainless steel, hard and wear-resistant, can be used for a long time
  • Occupies an area of small, is energy-saving, and can reduce the cost of operation

Parameters of Tire Sidewall Cutter

NameTire ring cutter
Motor Power4KW+0.75kw
Capacity40pcs/h
Work Range650-1250mm
Size1.8m*1.3m*1.6m
Weight650kg

How Does The Tire Sidewall Cutting Machine Work?

The truck tire sidewall cutter consists of a work disc, a motor, a reducer, a cutter assembly, operating and adjusting levers, a tensioner operating handle, and a base. The working procedure is as follows:

1. Place the waste tires on the working plate of the Rim Cutter and secure them with the clamping device.

2. Start the equipment, the motor drives the working plate to rotate, and the tires rotate synchronously.

3. Operate the up and down lifting levers to control the position of the knives, and when the knives are pressed down to the position of the tire rims, the knives are controlled by the operating levers to cut downward.

4. The blade rotates and cuts, realizing the effective separation of tire bead and tire ring.